M600i Control Panel 67
This is the Internet version of the user guide. © Print only for private use.
The calling card icon will now be visible
in the status bar. The .pbx file may be set up so
that you can send commands to the
switchboard by tapping the calling card icon.
Call Waiting
Choose whether you want your phone to alert
you when you receive an incoming call during
an ongoing call.
Select
Tools > Control panel > Call settings >
Call waiting
, then set this option to On/Off.
If ALS (two phone lines on the SIM card) is
available, you can set this option to On/Off for
both voice lines.
The settings are entered into the mobile
network. Select
More > Refresh to view the
current settings.
Forward Calls
The phone can forward incoming calls (voice
and data & fax calls) to another number if you
are busy, not reachable, or do not answer. You
can also choose to forward all calls.
Select
Tools > Control panel > Call settings >
Forward calls
, then choose which type of calls
you want to forward and where to forward
them.
Forward options
Lookup in contacts – select an entry from
your Contacts phonebook.
Enter number – enter a phone number to
which calls will be forwarded.
Off – your incoming calls will not be
forwarded.
All forwarding settings are entered into the
mobile network. Select
More > Refresh to
view the current settings.
Flag Call
Select Tools > Control panel > Call settings >
Flag call
to enable this feature. If enabled and
you reject a call, you will be asked to set a
follow-up reminder that will appear after a
predefined period of time that you choose.
Handsfree settings
Select Tools > Control panel > Call settings >
Handsfree
to set how to answer an incoming
call when handsfree equipment is connected.
Answering mode
Normal – answer calls normally.
Any key – press any key on the keyboard
to answer.
To Next Page
Loading...
