M600i Control Panel 71
This is the Internet version of the user guide. © Print only for private use.
This means you do not have to initiate pairing
because the headset does so when switched on.
It also means you do not have to enter a
passcode, although you must still confirm the
pairing.
When you select a device from the list, a list of
options will open:
Device options
Device name – select to change the name
of the device. This only affects how the
device is presented in your phone.
Trust this device – allows the device to
connect to your phone without your
repeated confirmation.
Enable as audio – to use the device (for
example, a Bluetooth headset) in audio
applications. Devices enabled for audio
are listed in the Audio tab, .
Bluetooth services
The services (sometimes called profiles)
supported by the connected device are listed in
the Detail view for the device. On the tab,
select the device, then choose the right
Services tab.
Audio tab
This is where all paired devices marked
Enable as audio are listed. You can later
disable a device for audio to prevent your
phone from accidentally transferring sound to
it.
Infrared Port
Select Tools > Control panel > Connections >
Infrared
to activate the infrared port.
Infrared options
On or On for 10 minutes – turns the port
on.
Off – turns the port off.
Internet Accounts
See Setting Up Internet, Email and MMS on
page 61.
Mobile Networks
Select Tools > Control panel > Connections >
Mobile networks
to set the way your phone
chooses an available network when you are
outside your home mobile network coverage
area.
Mobile networks has two tabs, Search
and
Preferred list.
Search tab
The phone searches for a network. You can
choose between
Automatic or Manual search.
More menu options
Select network – start a search for a
network.
New search – search for the next network
in the preferred list.
To Next Page
Loading...
