Should
you
encounter
a
problem
with
your
unit, find your
problem
in the troubleshooting checklist
below
and
take the indicated
corrective action.
If
the
problem
persists, contact your Sony dealer.
Note
that
if
service personnel
changes
some
parts during repair,
these parts
may
be
retained.
When
bringing the system in for
repairs, be sure to bring in the
entire system.
This
product
is a system product,
and
the entire system is
needed
to
determine
the location requiring
repaIr.
The remote does not function.
• Update your iPod with the latest
software before using with
TDM-iP20.
• Remove any obstacles.
• Point the remote at the AV
system (DAV series, etc.)'s
sensor.
• The distance between the
remote and the AV system is too
far.
• Replace the battery.
• Make sure the iPod* is securely
connected.
• Check that the DMPORT
function is selected on the AV
system.
• Turn on and off the AV system.
Video/photo image from the
iPod does not appear on the TV
screen.
• Make the connection according
to your AV system (page
7).
• Check that the TV output setting
on the iPod is on (Refer
to
the
user's guide
of
your iPod).
• Check the color system (NTSC/
PAL) on your iPod (Refer to the
user's guide
of
your iPod).
• Check that the iPod*
is
compatible with the video
output (Refer to the user's guide
of
your iPod).
• Check that the connected AV
system
is
compatible with the
video output of DMPORT
(Refer
to
the operating
instructions of your AV
system).
• Check that the DMPORT
function is selected on the AV
system.
Video/photo image from the
iPod does not appear on the
iPod display.
• Adjust the video/photo image
output settings
to
the
appropriate settings.
continued---
11
US
To Next Page
Loading...
