12
US
There is no sound.
• Update your iPod with the latest
software before using with
TDM-iP20.
• Check the connections.
• Make sure the unit
is
securely
connected.
• Make sure the iPod* is securely
connected.
• Make sure the iPod*
is
playing
mUSIC.
•
It
may take time to start
playback depending on the
contents.
• Check the volume
of
the
connected AV system.
There is severe hum or noise.
• Move the unit away from the
source
of
noise.
The sound is distorted.
• Reduce the volume of the
connected AV system.
• Set the "EQ" setting
of
the iPod
to
"Off'
or "Flat".
* See "Compatible iPod models"
(page
3).
On
safety
Should any solid object
or
liquid
fall into the system, unplug the
system
and
have it
checked
by
qualified personnel before
operating it any further.
On
placement
• Do not place the unit in an
inclined position.
• Do not place the unit in
locations where it is;
- Extremely hot
or
cold
- Dusty
or
dirty
- Very humid
- Subject to vibrations
- Subject to direct sunlight.
• Use caution when placing the
unit on surfaces that
have
been
specially treated (with wax, oil,
polish, etc.) as staining
or
discoloration
of
the surface may
result.
On
heat
buildup
• Although the unit heats
up
during operation, this is not a
malfunction.
• Place the unit in a location with
adequate ventilation to prevent
heat buildup in the unit.
If
you have any questions
or
problems concerning
your
unit,
please consult your nearest Sony
dealer.
To Next Page
Loading...
