27
US
IIJ
AM
Unit
AM
loop antenna (aerial)
(supplied)
FM
wire antenna (aerial)
(supplied)
Outdoor
FM
antenna (aerial)
Rear panel of the unit
DI'!I
• Adjust the direction
of
the AM loop antenna (aerial) for best AM broadcast sound.
·If
you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial)
as
shown below.
To
connect
the
antenna
(aerial)
To
assemble
the
AM
loop
antenna
(aerial)
-
• Keep the AM loop antenna (aerial) and cord away from the system
or
other AV components,
as
noise may result.
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
To Next Page
Loading...
