Sony BDV-E500W - Page 47

-
Press 1'/oJ, repeatedly until "AUDIO
MENU" appears in the front panel
display, then press
G or~.
Press 1'/'" repeatedly until "AN SYNC"
appears
in the front panel display, then
press
G or~.
4 Press 1'/oJ, to adjust the delay between
the picture and sound.
You can adjust from 0 ms to 300 ms in 25
ms increments.
3
5 Press G.
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
When the sound does not match the pictures on
the
TV screen, you can adjust the delay between
the picture and sound.
1 Press SYSTEM MENU.
2
-
• Depending on the input stream, AIV SYNC may not
be effective.
-
• Set the picture setting of your TV to [S tandard] before
changing [Picture Quality Mode].
• [Video Settings] is disabled when the connected TV
is set to Theater Mode (page 68).
• Depending on the disc or the scene being played,
[FNR], [BNR], or [MNR] effects may be hard to
discern.
Adjust'lh"pl'ctu.-rfor ild.'"
- '"" ' - "- ,~ , :::: , .• , ~ < •
:,~lect !hc item JOU warn Ie cnJilIJe.
FNR Off
-_·_-~--_··---(ffi-··--
MNR Off
[Picture Quality Mode]
Optimizes the picture settings for different
lighting environments.
• [Standard]
• [Brighter Room]
• [Theater Room]
[FNR]
Reduces random noise appearing in the
picture.
• [Off]
• [Auto]
[BNR]
Reduces mosaic-like block noise in the
picture.
• [Off]
• [Auto]
[MNR]
Reduces minor noise around the picture
outlines (mosquito noise).
• [Off]
• [Auto]
4 Press +-/1'/oJ,j-+ to select or adjust the
settings, then press
G.
To adjust any other items, repeat steps 3 and
4.
3 Press 1'/-1, to select an item, then press
G.
1 Press OPTIONS during playback.
The options menu appears.
2 Press 1'/oJ, to select [Video Settings],
then press
G.
The [Video Settings] screen appears.
47
US