Need help?Do you have a question about the Sony CA-550 and is the answer not in the manual?
Lists the included accessories with Sony part numbers and quantities.
Details on various connectors and cable types used for connectivity.
Procedure for installing a COAX connector as an alternative to a triaxial cable.
Explanation of the functions of internal switches on the AU-211 board.
Illustrates system configurations and lists optional accessories for connectivity.
Step-by-step instructions for removing the camera adaptor cabinet panels.
Diagrams showing the physical locations of the main printed circuit boards.
Detailed descriptions of the circuits and functions of key boards within the unit.
Procedure for accessing and using the self-diagnosis mode for board checks.
Details on available extension boards and harnesses for specific checks or adjustments.
Instructions for safely disconnecting and connecting flexible card wires.
Step-by-step guides for replacing various circuit boards within the unit.
Procedure for replacing the AC.DC/DC converter module.
Instructions for replacing the multiplex filter assembly.
Identifies parts that require periodic inspection and replacement due to wear.
Information on EEPROM data and notes regarding repair parts.
Lists required equipment and initial setup steps for electrical alignment.
Specific adjustment procedures for the AU-211 board, including battery alarm set.
Detailed adjustment procedures for the TR-90 board, covering RF and deviation settings.
Procedures for electrical alignment of the MD-103 board, including VCO and level adjustments.
Step-by-step instructions for adjusting the DM-98 board, covering video signals.
Important warnings and information regarding the use of specified repair parts.
Detailed exploded views illustrating component parts and their assemblies.
Comprehensive list of electrical components with part numbers and descriptions.
List of accessories that are supplied with the camera adaptor.
Lists specialized tools and fixtures required for maintenance and adjustments.
Pin assignment details for various diodes used in the circuitry.
Pin assignment details for various transistors used in the circuitry.
Pin assignment details for integrated circuits used in the camera adaptor.
A comprehensive block diagram showing the overall system architecture.
Block diagram detailing the functional blocks of the AU-211 board.
Block diagram illustrating the functional blocks of the TR-90 board.
Block diagram showing the functional blocks of the MD-103 board.
Block diagram detailing the functional blocks of the DM-98 board.
Diagrams indicating the physical placement of all circuit boards within the unit.
Detailed schematic diagram for the AU-211 circuit board.
Detailed schematic diagram for the TR-90 circuit board.
Detailed schematic diagram for the MD-103 circuit board.
Detailed schematic diagram for the DM-98 circuit board.
Wiring diagrams illustrating connections between various boards and the frame.
Component layout diagrams for the AU-211 board (A and B sides).
Component layout diagrams for the TR-90 board (A and B sides).
Component layout diagrams for the MD-103 board (A and B sides).
Component layout diagrams for the DM-98 board (A and B sides).
Component layout diagrams for the MB-605 board (A and B sides).
To Next Page
General