Audio dubbing
You can record an audio sound to add to the original sound on a tape by connecting
audio equipment or a microphone. If you connect tile audio equipment, you can add
sound to your recorded tape by specifying starting and ending points. The original
sound will not be erased.
Use the Remote Commander for this operation.
MIC
(PLUG IN
r-,
: Signal flow
Microphone (not supplied)
You can check the recorded picture and sound by connecting the AI_IDIO/VIDEO jack
to a TV.
The recorded sotmd is not output fi'om a speaker. Check the sound by using the TV or
headphones.
Microphone (not supplied)
Intelligent AccessolTyShoe
73
To Next Page
Loading...
