Superimposing a title
If you use a tape with cassette memory, you can superimpose the title. When
you play back tile tape, the title is displayed fior5 seconds Dora the point where
you superimposed it.
You can select one of 8 preset titles and 2 custom titles (p. 80).You can also select tile
color, size and position of titles.
(1) In CAMERA, playback pause or playback mode, press TITLE to display tile
title menu.
(2) Turn the SEL/PUSH EXEC dial to select _, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select the desired title, then press the dial.
The title is flashing.
(4) Change the color, size, or position, if necessary.
@ Turn the SEL/PUSH EXEC dial to select the COLOR, SIZE or POSITION,
then press the dial. Tile item appears.
@ Turn the SEL/PUSH EXEC dial to select the desired item, then press the
dial.
@ Repeat steps @ and @ until tile title is laid out as desired.
(5) Press the SEL/PUSH EXEC dial again to complete the setting.
In tile recording, playback or playback pause mode:
The TITLE SAVE indicator appears oil tim screen for 5 seconds and tile title is
set.
In the standby mode:
The TITLE indicator appears. And when you press START/STOP to start
recording, TITLE SAVE appears on the screen for 5 seconds and the title is set.
5'
©
r_%. Y_ -_VACATION_
_ _l_ _
VACATION ] I p×EO S*VE T,TLE.....
77
To Next Page
Loading...
