Sony DFS-900M - Page 144

144
Customizing DME Effects
Chapter 5 Adjusting Wipes and Keys
xxx Page Turn 2 (2)
xxx Page Turn 3 (3)
Page Peel sub menu parameters
Adjust the following parameters to adjust the Page Peel
effect.
Page Peel effect example
The Page Peel sub menu has two pages. To switch between
pages, press the h and H buttons in the numeric
keypad.
(xxx: “M/E DME” appears if you are setting up a
transition, and “Keyer” appears if you are setting up a key.)
xxx Page Peel 1 (1)
xxx Page Peel 2 (2)
Splits sub menu parameters
Adjust the following parameters to adjust the Splits effect
Splits effect example
The Splits sub menu has two pages. To switch between
pages, press the h and H buttons in the numeric
keypad.
Specify the
rotation angle of
the turn.
F2 Rot
(Rotation)
–8.000 to 8.000
Specify the
angle of the
turn.
F3 Ang (Peel
Angle)
–8.000 to 8.000
Specify the size
of the turn.
F4 Amt
(Amount)
–2.000 to 2.000
Operation Knob Parameter Settings
Select Page Roll
(roll the page
up) or Page
Turn (turn the
page up).
F1 Typ (Type) Turn: Page Turn
Roll: Page Roll
Specify the X
coordinate of
the center
position of the
page turn.
F2 PX (Position
X)
–8.000 to 8.000
Specify the Y
coordinate of
the center
position of the
page turn.
F3 PY (Position
Y)
–8.000 to 8.000
Specify the
number of
segments in the
turn.
F4 Num (Num_
Segment)
3 to 31
Operation Knob Parameter Settings
Specify the
radius of the
turn.
F2 Rad
(Radius)
0.000 to 1.000
Specify the
amount of
spiraling when
the turn width is
increased
stepwise.
F3 Spl (Spiral) –8.000 to 8.000
Specify
staggering of
the turn
position.
F4 Stg
(Stagger)
–8.000 to 8.000
Operation Knob Parameter Settings
Operation Knob Parameter Settings
Select Page Roll
(roll the page
up) or Page
Turn (turn the
page up).
F1 Typ (Type) Turn: Page Turn
Roll: Page Roll
Specify the
rotation angle of
the peel.
F2 Rot
(Rotation)
–8.000 to 8.000
Specify the
width of a strip
when peeling off
in strips.
F3 Wid
(Peel_Width)
0.000 to 1.000
Specify the
amount of
peeling.
F4 Amt
(Amount)
–2.000 to 2.000
Operation Knob Parameter Settings
Specify the tilt of
the peel.
F3 Tlt (Tilt) –1.000 to 1.000
Specify the size
of the distance
out to the peel.
F4 Rad
(Radius)
0.000 to 1.000