Sony DFS-900M - Display Panel;Menu Control Block; BKDF-901 Rear Panel

19
BKDF-901 1M/E Control Panel
Chapter 2 Names and Functions of Parts
c USER/STILL button
When pressed with the SHIFT button unlit, displays the
menu used for management of user specified wipe patterns
and DME wipe patterns. When pressed with the SHIFT
button lit, displays the menu for still image storage
operations, such as download, capture, and export.
d SHIFT button
Enables the functions of the STILL button and the setup
buttons (except for the AUX button).
9 Display Panel/Menu Control
Block
a Display panel
Displays the operation and setting menus of the switcher.
The menu title appears in the upper left. Below it is the
display area for four parameters. Useful supporting
information for menu operations may appear in the upper
right.
b F1 to F4 knobs
The F1 to F4 adjustment knobs are located beneath the
parameter display area. They correspond to up to four
parameters per menu. You can set parameter values by
rotating the knobs or by pressing a knob and entering the
value for the corresponding parameter in the numeric
keypad.
Instead of specifying parameter values, some menu items
may select actions such as store or delete. To execute an
action, press the corresponding knob and hold it down for
one second or longer.
BKDF-901 Rear Panel
1 Display panel
2 F1 to F4 knobs
Menu title
Supporting information
The F1 to F4 knobs correspond to menu parameters
1 EXT DISPLAY connector
2 PROCESSOR connector
3 MAINTENANCE connector
4 DEVICE connector
7 POWER switch
6 - AC IN connector
5 Ground terminal