Sony DFS-900M - Masking Downstream Keys with Box Masks

150
Masking Downstream Keys with Box Masks
Chapter 5 Adjusting Wipes and Keys
Masking Downstream
Keys with Box Masks
You can use the Box Mask sub menu of the Keyer menu to
apply box masks to downstream keys.
To enable the Box Mask sub menu
1 When using the BKDF-901: Depending on the key
that you want to apply the box masks, press the
DSK1 or DSK2 button in the KEY
DELEGATION block, lighting it.
When using the BKDF-902: Depending on the key to
which you want to apply the box masks, press the
DSK1 or DSK2 button in the key/AUX bus
control block, lighting it.
2 Press the MASK button in the KEYER block, lighting
it.
Box mask is enabled, and the Box Mask sub menu
appears in the display panel.
To adjust the position of the box mask
Adjust the parameters of the Box Mask sub menu.
BKDF-901
BKDF-902
Operation Knob Parameter Settings
Specify the
position of the
left edge of the
box mask.
F1 L (BoxMask
Left)
0 to 1024
Specify the
position of the
right edge of
the box mask.
F2 R (BoxMask
Right)
0 to 1024
Specify the
position of the
top edge of the
box mask.
F3 T (BoxMask
To p)
0 to 1024
Specify the
position of the
bottom edge of
the box mask.
F4 B (BoxMask
Bottom)
0 to 1024