37
Connecting Peripheral Devices
Chapter 3 Preparations
Connection Example 3: Connection to a Device Equipped with a DVI (DVI-I)
Connector
You can use the optional BKDF-912 2 DVI Input Board or the optional
BKDF-962 2 DVI Output Board to connect the switcher to a computer or other
device equipped with a DVI-I connector. The digital signals of the DVI-I
connector are compatible with the digital output signals of the HDMI standard,
and analog output signals are compatible with the analog signals of the HD15
(high-density 15-pin D-Sub) standard. You can use conversion cables and
adaptors to connect them to devices equipped with HDMI or HD15 connectors.
• When you input video signals from the HDMI connectors to the switcher, the
switcher can receive only progressive video signals. The switcher cannot
process the video signals copy-protected by HDCP (High-bandwidth Digital
Content Protection).
• If you selected “HDTV” for the DVI output signals (page 94), color difference
component signals (Y/P
b
/P
r
) are output from the analog signal output
connectors of the BKDF-962. For details about the pin assignment of the
BKDF-962 connector, see page 213.
Notes
To Next Page
Loading...
