Sony DFS-900M - Deleting Sequences

160
Sequence Operations
Chapter 6 Registering Operations and Settings
1 Press the h and H buttons to move to the point
where you want to add a keyframe.
If you want to add a new keyframe at the end of the
sequence, move to the last current keyframe.
2 Press the SEQ button in the numeric keypad.
The switcher exits sequence mode.
3 Create the video that you want to add as a keyframe.
4 Press the SEQ button again to switch to sequence
mode.
5 Press the INSERT button.
The newly created video is added as a new keyframe,
and the keyframe that was previously at that position
is shifted toward the end of the sequence, along with
all subsequent keyframes.
To delete keyframes
To delete a keyframe from a sequence, recall the sequence
and then proceed as follows.
1 Press the h and H buttons to move to the position of
the keyframe that you want to delete.
2 Press the DELETE button.
Deleting Sequences
To delete a stored sequence, recall that sequence and then
press the F4 knob and hold it down for one second or
longer.
BKDF-901
BKDF-902
BKDF-901
BKDF-902