68
Menu Operations
Chapter 3 Preparations
8
Press the mark on the screen.
The control panel is powered off and then starts again automatically. The
new settings are reflected when it starts again.
Press the mark to return to the calibration screen of step 4.
Calibrate the touch panel monitor again if you notice that a touch position
is different from the display position.
GUI menu screen configuration
a Menu category section
Displays tabs (menu selection tabs) for each of the five categories in the basic
menu configuration (see page 63). When you select a tab, the sub menus for that
menu appear in the sub menu section 2.
b Sub menu section
Displays tabs for the sub menus in the menu that was selected in the menu
category section 1.
Note
1 Menu category section
2 Sub menu section
3 Status section
4 Parameter section
To Next Page
Loading...
