155
Additional information
Quick reference chart
This section describes the restrictions in the setup of the following functions, depending on the mode dial position or the setup of some functions
: shutter speed, aperture, flash, etc.
Quick chart of exposure, white balance, and auto focus functions (based on the mode dial position)
• Note that shutter speed and ISO sensitivity are not as valid for the above table when the flash strobes.
• When using the digital zoom or horogram AF, the AF is automatically set to focus on the centrally-located subject.
Shutter speed (second) Aperture ISO
White
balance
Metering
mode
AF range
finder
frame
Auto (1/8 to 1/3200) Auto (F2 to F8) Auto (64 to 200) Auto
Multi-pattern
metering
Multipoint
P Auto (1 to 1/3200) Auto (F2 to F8)
Auto (64 to 200)/Setup is
available from 64 to 800
Setup is
available
Setup is
available
Setup is
available
S Setup is available from 30 to 1/2000 F2 to F8
Auto (64 fixed)/Setup is
available from 64 to 800
Setup is
available
Setup is
available
Setup is
available
A
8 to 1/2000 (aperture value F2 to
F7.1)
Setup is available from F2
to F8
Auto (64 fixed)/Setup is
available from 64 to 800
Setup is
available
Setup is
available
Setup is
available
8 to 1/3200 (aperture value F8)
M
30 to 1/2000 (aperture value F2 to
F7.1)
Setup is available from F2
to F8
Auto (64 fixed)/Setup is
available from 64 to 800
Setup is
available
Setup is
available
Setup is
available
30 to 1/3200 (aperture value F8)
To Next Page
Loading...
Need help?
General
