64
d Select [BRK] (Bracket Step)
with b/B, then select the
desired bracket step value
with v/V.
±1.0EV: Shifts the exposure value by
plus or minus 1.0EV.
±0.7EV: Shifts the exposure value by
plus or minus 0.7EV.
±0.3EV: Shifts the exposure value by
plus or minus 0.3EV.
e Shoot the image.
To return to normal mode
In Step 2, select [Normal].
• When [Mode] (REC Mode) is not set to
[Normal], you cannot use the Exposure Bracket
mode.
• You may not be able to use the Exposure
Bracket mode depending on the Scene
Selection mode (page 37).
• You cannot use the flash in this mode.
• During shooting in this mode, the images are
not displayed on the screen. Compose the
image before pressing the shutter button.
• The focus and white balance are adjusted for
the first image, and these settings are also used
for the other images.
• When the exposure is manually adjusted
(page 59), the exposure is shifted based on the
adjusted brightness.
• The recording interval is approximately 0.42
second.
• If the subject is too bright or too dark, you may
be unable to shoot properly with the selected
bracket step value.
• You cannot select shutter speeds of 1/25 second
or slower.
Selecting the ISO
sensitivity
– ISO
Mode dial: P/S/A/M
You can change the camera’s sensitivity to
light. When you select a high-number
setting, you can shoot in a dark place.
Normally, the ISO sensitivity is set to
[Auto]. When set to [Auto], the ISO
sensitivity is automatically increased in a
dark place.
a Set the mode dial to P, S, A or
M.
b Press MENU.
The menu appears.
Mode dial
Multi-selector (v/V/b/B)
MENU
To Next Page
Loading...
Need help?
General
