4-10
DSR-2000A/2000AP
44
44
4 Main code 08
Sub Detected contents Operation after Operable mode Display period
code detecting an
abnormality
03A Detected the abnormal drum speed. Retry (The EJECT Displayed until the
mechanism error is solved.
Video monitor display unthreads once
then threads
again.)
032 The abnormal drum speed error is not solved. AUTO OFF EJECT Displayed until the
next cassette is
inserted.
55
55
5 Main code 09
Sub Detected contents Operation after Operable mode Display period
code detecting an
abnormality
010 Detected abnomal position of cassette compartment. Cassette tape insertion and unthreading Displayed until the
020 Detected an abnormality of threading position sensor.
are prohibited until the error is solved. error is solved.
028 Detected an abnormal current of threading motor.
221 Failed to complete threading within the specified time AUTO OFF EJECT Displayed until the
224 Failed to detect the threading FG during threading.
(Emergency EJECT) next cassette is
821 Failed to complete unthreading within the specified time
inserted.
824 Failed to detect the threading FG during unthreading.
..
..
. Main code 2X : Abnormality related to the mechanism control
11
11
1 Main code 20
Sub Detected contents Operation after Operable mode Display period
code detecting an
abnormality
018 Detected the abnormal current in the cassette up/down motor. AUTO OFF EJECT Displayed until the
111 Failed to complete the cassette down motion within the
(Emergency EJECT) next cassette is
specified time.
inserted.
911 Failed to complete the cassette up motion within the
specified time.
ERROR
DRUM SPEED ERROR
HAS BEEN DETECTED
WA I T UNT I L TH I S
I ND I CAT I ON GOES OFF.