Sony DSR-80 - 4-4. SERVO CHECK

4-9
DSR-80/80P/60/60P
4-4. SERVO CHECK
Checks the servo system automatically or semi-automatically.
Operating procedure
1. Enter the maintenance menu.
2. Move the cursor to “SERVO CHECK” which is displayed with
a white background using the [(], [)] keys.
3. Press the [*] key.
“SERVO CHECK” is selected and its lower layer submenu
appears.
4. Move the cursor displayed with a white background to a
desired item using the [(], [)] keys.
5. Press the [*] key.
The lower layer submenu appears.
6. Move the cursor displayed with a white background to a
desired item using the [(], [)] keys.
7. Press the [&] key to execute the selected item.
(Refer to the respective menu description for the check
procedure after execution.)
8. After completing the check, press the [MENU] key to return to
the main menu.
9. To check other menus and submenus, repeat steps 4 to 8.
10.Press the [MENU] key to exit the maintenance menu.
Note : If the
[MENU][MENU]
[MENU][MENU]
[MENU] key is pressed while the check is in
progress, the check operation is forcibly ended and
the system returns to the main menu.