2-9
DSR-80/80P/60/60P
2-8-2. Matching Connectors
When external cables are connected to the connector on a connector panel during maintenance, the hardware listed below
(or equivalents) must be used.
For DSR-80/80P only DSR-80/80P, 60/60P Side connector Matching Connector/Cable
Panel indication Connector/Cable Sony Part No.
ANALOG IN BNC, MALE 1-560-069-11
O REF. VIDEO IN
O TIME CODE IN
O VIDEO IN
O COMPONENT/RGB VIDEO IN
O S VIDEO IN YC-15 V (1.5 m) optional accessory
O AUDIO IN CH-1/2/3/4 XLR 3P, MALE 1-508-084-11
ANALOG OUT BNC, MALE 1-560-069-11
REF. VIDEO OUT
TIME CODE OUT
VIDEO OUT
COMPONENT/RGB VIDEO OUT
MONITOR AUDIO OUT PIN PLUG Standard Product
S VIDEO OUT YC-15 V (1.5 m) optional accessory
AUDIO OUT CH-1/2/3/4 XLR 3P, FEMALE 1-508-083-11
O QSDI INPUT BNC, MALE 1-560-069-11
QSDI OUTPUT BNC, MALE 1-560-069-11
DIGITAL AUDIO (AES/EBU) XLR 3P, MALE 1-508-084-11
O INPUT CH-1/2, CH-3/4
O OUTPUT CH-1/2, CH-3/4 XLR 3P, FEMALE 1-508-083-11
TBC REMOTE CONNECTOR, D-SUB 15P, FEMALE 1-561-610-21
and JUNCTION SHELL, 15P 1-561-929-00
REMOTE CONNECTOR, D-SUB 9P, MALE 1-560-651-11
and JUNCTION SHELL, 9P 1-561-749-11
RCC-5G (5 m) supplied accessory
RCC-10G (10 m) optional accessory
RCC-30G (30 m) optional accessory
To Next Page
