2-14
DSR-80/80P/60/60P
2-9-3. On-board Switch Setting
SV-184
S101 : 8 bit
Switch No. Description Factory Setting
1 Set this switch to ON in some adjustment modes. OFF
. Search speed in LOCAL is as follows :
PLAY/F.FWD pressed simultaneously : FWD searchx5
PLAY/REW pressed simultaneously : REW searchx5
. HOURS METER can enter reset mode.
2 factory use OFF
3 Use this switch when operating the machine with casseette removed. OFF
4 This defeats an error detection of mechanism and servo system alignment. OFF
5 factory use OFF
6 factory use OFF
7 factory use OFF
8 factory use OFF
S201 : 4 bit
Switch No. Description Factory Setting
1 ITI center shift switch: OFF
Set to ON when playing back the tracking reference tape.
2 factory use OFF
3 factory use OFF
4 factory use OFF
1
2
3
4
5
6
A
BC DEFGH JKLM N
P
S201 S101
To Next Page
