2-10
DSR-80/80P/60/60P
2-8-3. Input/Output Signals of the Connectors
INPUT
REF.VIDEO : BNCx2 (loop-through)
1.0 Vp-p, 75 Z, sync negative : for composite video signal (black burst signal possible)
VIDEO IN : BNCx2 (loop-through)/DSR-80/80P
1.0 Vp-p, 75 Z, sync negative
COMPONENT/RGB IN VIDEO : BNCx3/DSR-80/80P
Luminance : 1.0 Vp-p, 75 Z, sync negative
R-Y/B-Y : 0.7 Vp-p, 75 Z (NTSC : 75 % PAL : 100 %)
S VIDEO IN : DIN 4Px1/DSR-80/80P
Y : 1.0 Vp-p, 75 Z, sync negative
C : NTSC 0.286 Vp-p (burst level), 75 Z
PAL 0.3 Vp-p (burst level), 75 Z
SDI
*
: BNCx2 (active-through)/DSR-80/80P
Serial digital interface format (270 Mbps),
SMPTE 259M/ITU-R BT.656
*
Using optional DSBK-120/120P (SDI output board)
QSDI IN : BNCx1/DSR-80/80P
Serial digital interface (DVCAM compression signal : Video + Audio + TC signal)
AUDIO IN : XLR 3Px4/DSR-80/80P
Reference level switchable (_6/0/+4 dBu), 600 Z/10 kZ switchable, balanced
AES/EBU : XLR 3Px2/DSR-80/80P
110 Z, balanced
TIME CODE
*
: BNCx1/DSR-80/80P
0.5 to 18 Vp-p, 3 kZ, unbalanced
*
Using optional DSBK-130/130P (time code input/output board)
CONTROL-S (SIRCS) : Mini jack (exclusive use)
To Next Page
