2-11
DSR-80/80P/60/60P
OUTPUT
REF.VIDEO : BNCx1
NTSC 0.286 Vp-p, 75 Z, sync negative (composite sync + burst signal)
PAL 0.3 Vp-p, 75 Z, sync negative (composite sync)
VIDEO OUT : BNCx2
1/2 (SUPER) 1.0 Vp-p, 75 Z, sync negative
COMPONENT/RGB OUT VIDEO : BNCx3
Luminance : 1.0 Vp-p, 75 Z, sync negative
R-Y/B-Y : 0.7 Vp-p, 75 Z (NTSC : 75 % PAL : 100 %)
S VIDEO OUT : DIN 4Px1
Y : 1.0 Vp-p, 75 Z, sync negative
C : NTSC 0.286 Vp-p (burst level), 75 Z
PAL 0.3 Vp-p (burst level), 75 Z
SDI
*
: BNCx2
Serial digital interface format (270 Mbps),
SMPTE 259M/ITU-R BT.656
*
Using optional DSBK-100/100P (SDI output board)/DSR-60/60P
*
Using optional DSBK-120/120P (SDI input/output board)/DSR-80/80P
QSDI
*
OUT : BNCx1
Serial digital interface (DVCAM compression signal : Video + Audio + TC signal)
*
Using optional DSBK-110/110P (QSDI output board)/DSR-60/60P
AUDIO OUT : XLR 3Px4, MALE
+4 dBu, 600 Z load, balanced (low impedance)
MONITOR AUDIO : PHONO JACKx1
_6 dBu, 47 kZ load, unbalanced
HEADPHONES : Stereo phone jackx1
_16 dBu (front VR max.), 8 Z load, unbalanced ø6.3
TIME CODE
*
: BNCx1
2.2 Vp-p ±3.0 dB, 75 Z, unbalanced
*
Using optional DSBK-130/130P (time code input/output board)
http://getMANUAL.com