Sony DSR-80 - SECTION 2 INSTALLATION; 2-1. INSTALLATION PROCEDURE; 2-2. OPERATIONAL ENVIRONMENT; 2-3. OPERATING VOLTAGE

2-1
DSR-80/80P/60/60P
SECTION 2
INSTALLATION
Be sure to install the DSR-80/80P/60/60P in location satisfying the required operational environment described below to
assure the DSR-80/80P/60/60P superior performance and to maintain the excellent serviceability and accessibility.
2-1. INSTALLATION PROCEDURE
2-2. OPERATIONAL ENVIRONMENT
. Operating temperature : +5 dC to +40 dC
. Humidity : 80 % or less
. Storage temperature : _20 dC to +60 dC
. Locations to avoid : . Areas where the unit will be exposed to direct sunlight or any other strong lights.
. Dusty areas or areas where it is subject to vibration.
. Areas with strong electric or magnetic fields.
. Areas near heat sources.
(Good air circulation is essential to prevent internal heat build-up. Place the unit in location
with sufficient air circulation. Do not block the ventilation holes on the cabinet and the rear
panel.)
. Horizontal condition : within ±30 d
2-3. OPERATING VOLTAGE
. Power voltage : AC 100 V to 120 V / (UC)
AC 200 V to 240 V / (CE)
. Power frequency : 50/60 Hz
. Power consumption : (UC) : 85 W/DSR-60, 140 W/DSR-80/80P
(CE) : 87 W/DSR-60P, 145 W/DSR-80P
START
DETERMINATION OF
INSTALLATION PLACE
UNPACKING
RACK MOUNTING
CONNECTORS
INITIAL SETUP
OPERATION CHECK
END
· · · 2-2. OPERATIONAL ENVIRONMENT
· · · 2-3. OPERATING VOLTAGE
· · · 2-4. INSTALLATION SPACE

· · · 2-5. SUPPLIED ACCESSORIES

· · · 2-7. RACK MOUNTING

· · · 2-8-2. MATCHING CONNECTORS
· · · 2-8-3. INPUT/OUTPUT SIGNALS OF THE CONNECTORS

· · · 2-9. INSTALLATION SETUP AND ADJUSTMENT
· · · If an error message is shown on the time counter, refer to
“3-3. ERROR MESSAGE” in SERVICE MANUAL VOL. 1.
http://getMANUAL.com