10-15 (P)
DSR-80/80P/60/60P
10-5-1-16. PB INT SCH Phase Adjustment
. PB mode
100 % Color bar/XH5-1AP
. REF. VIDEO IN ; No signal
. Waveform/Vector (1751) ; SCH mode
. After adjustment, connect REF. VIDEO IN.
Connection 2
VIDEO OUT 1 (75 Z terminated)
(A) Burst Adjustment (B) INT SC
1PHASE control/Vector 1RV504/IO-149 (C-3)
TRIG : INT/WFM
SCH mode
Spec.(A) Set the dot of the burst in the right position on the scale.
(B) The SYNC should be in the center of the bursts (SCH=0
dd
dd
d).
Conditions for adjustment Adjustment
..
..
. Specification