2
DSR-80/80P/60/60P
The sections covered in the manual are summarized below to give you a general
understanding of the manual.
SECTION 1 OPERATING INSTRUCTION
Describes the contents of the operating instructions.
SECTION 2 INSTALLATION
Contains rack mount information necessary for installation of the equipment, the
connector information necessary for connectiing the unit with peripherals and others.
SECTION 3 SERVICE OVERVIEW
Describes the replacement of the parts, the locations of the main parts and boards,
error code, notes and so on.
SECTION 4 MAINTENANCE MENU
Describes the maintenance menu.
SECTION 5 PERIODIC INSPECTION AND MAINTENANCE
Describes the periodic inspection and cleaning procedure.
SECTION 6 REPLACEMENT OF MECHANICAL PARTS
Describes the replacement procedures and adjustment after replacement.
SECTION 7 TAPE PATH ALIGNMENT
Describes the adjustment procedures of tape path system.
SECTION 8 ELECTRICAL ALIGNMENT OVERVIEW
Describes the general information for electrical adjustments.
SECTION 9 (This section is intentionally left blank.)
SECTION 10 ELECTRICAL ALIGNMENT
Describes the electrical adjustment of each board.
Contents