Sony ICD-AX412F - Protecting Files

70
GB
Protecting a File
To prevent a file from being accidentally
erased or edited, you can protect an
important file. A protected file is marked
with the (protect) indicator and is
regarded as a read-only file you cannot
erase or edit.
1 Display the file which you want to
protect.
2 Press and hold •DISP – MENU in the stop
mode to enter the menu mode.
The menu mode window will be
displayed.
3 Press –. or >+ to select “Protect,”
and then press
N PLAY/
STOP•ENTER.
4 Press –. or >+ to select “ON,” and
then press
N PLAY/STOP•ENTER.
5 Press x (stop) to exit the menu mode.
To release protection
Select a protected file, and then follow steps
2 through 5. Select “OFF” in step 4, and
then press
N PLAY/STOP•ENTER.
P Note
You cannot set protection to the podcast files.
N PLAY/
STOP•ENTER
x
–., >+
•DISP – MENU
Protect indicator