Sony ICD-AX412F - Switching the Scanning Sensitivity

77
GB
Listening to the FM Radio
P Note
Select “DX” when the IC recorder reception
status is not good due to a weak signal.
Switching the scanning
sensitivity
You can set the scanning sensitivity when
presetting FM radio stations.
1 Press and hold •DISP – MENU during FM
reception to enter the menu mode.
The menu mode window will be
displayed.
2 Press –. or >+ to select “ Scan
Sensitivity
,” and then press N PLAY/
STOP•ENTER
.
3 Press –. or >+ to select “ High ” or
“
Low ” and then press N PLAY/
STOP•ENTER
.
The scanning sensitivity is set to “High”
when you purchase the IC recorder.
4 Press x (stop) to exit the menu mode.
N PLAY/
STOP•ENTER
x
–., >+
•DISP – MENU