71
GB
Listening to the FM Radio
Listening to the FM Radio
Tuning in an FM Radio Station
Tuning in a radio station by
scanning frequencies
The headphone cord of the stereo
headphones is an FM antenna, therefore,
connect the stereo headphones to the
i (headphone) jack when listening to the
FM radio.
P Notes
• During FM reception you cannot charge the
batteries.
• During FM reception, the DPC (SPEED
CTRL) and NOISE CUT functions do not
work.
1 Press and hold •DISP
–
MENU in the stop
mode to enter the menu mode.
The menu mode window will be
displayed.
2 Press –. or >+ to select “FM
Radio,” and then press
N PLAY/
STOP•ENTER.
The IC recorder enters the FM radio
mode.
3 Press •DISP
–
MENU briefly to move the
cursors (
b, B) to both sides of the
frequency display on the upper line in the
display window.
N PLAY/
STOP•ENTER
x
–., >+
•DISP
–
MENU