92
GB
Detail
Menu
Date&Time
Sets the clock to use the alarm function or record the date
and time.
1Press and hold •DISP
–
MENU to enter the menu mode.
Select “Detail Menu,” then “Date&Time.”
2Press –
. or >+ to select “Auto(Synchronizing)” or
“Manual,” and then press
N PLAY/STOP•ENTER.
Auto(Synchronizing)*:
When the IC recorder is connected to a computer that is
running the Sound Organizer software, the clock will
be automatically adjusted according to that computer.
Manual:
Sets the clock by setting year, month, day, hour, and
minute in sequence.
3When you select “Manual,” press –
. or >+ to set
the year, month, day, hour, and minute in sequence, and
then press
N PLAY/STOP•ENTER.
Select the last two digits of the year when you set the
year.When you set the minute, the “Executing...”
animation is displayed.
16
Time Display
Sets the clock display.
12-Hour:
12:00AM = midnight, 12:00PM = noon
24-Hour*:
0:00 = midnight, 12:00 = noon
–
Beep
Sets whether a beep will be heard or not.
ON*:
A beep will sound to indicate that an operation has been
accepted or an error has occurred.
OFF:
No beep sound will be heard.
P Note
The alarm sounds even if you set “Beep” to “OFF” in the
menu.
–
Menu items Settings (*: Initial setting) See page
To Next Page
Loading...
