Help Guide
IC Recorder
ICD-TX800
Setting the time period before the display screen automatically turns off (Screen Off
Timer)
The Screen Off Timer function on your IC recorder is set to “30sec” by default to save battery power. If you leave the IC
recorder unused for 30 seconds, the display window will turn off, but you can still perform any button operations. To turn
the display window back on, press BACK/HOME on the remote control or slide the HOLD•POWER switch on the IC
recorder to “HOLD” and then slide it back to the original (center) position.
Hint
To change the screen off timer setting, operate the remote control to select “
Settings” - “Common Settings” - “Screen Off
Timer” from the HOME menu, and then select “No Auto Screen Off,” “15sec,” “30sec,” “1min,” “3min,” or “5min.”
4-699-323-32(1) Copyright 2017 Sony Corporation
To Next Page
Loading...
