147
Troubleshooting
Cannot use this USB device.
Connect a correct USB device.
Check the LAN cable connection.
Could not connect to the network. Check
the LAN cable connection.
Cannot authenticate with WEP.
The password is wrong or automatic
acquisition of an IP address has
failed.
Check the password (WEP key). Check
the DHCP settings of the access point.
Cannot authenticate with WEP.
The password is wrong or the IP
address setting is wrong.
Check the password (WEP key). Check
the IP address setting of the camcorder.
Cannot execute functions.
Restart the camcorder. If the problem
persists, contact a service representative.
Failed to connect to the Ustream
server.
Check the “CLOCK SET”.
Check that the camcorder clock is set to
the correct time.
Ustream error occurred.
Try to restart streaming. Check the status
of the USTREAM service.
(http://www.ustream.tv/)
User name or the password is
invalid.
There may be an input error in the user
name or password. Check that the entered
user name and password are correct.
The server rejected the request.
Try to restart streaming. Check the status
of the USTREAM service.
(http://www.ustream.tv/)
Authentication information is invalid.
Check the user name and password.
Check (NETWORK SET) t
[USTREAM] t [USER INFO SET]
settings.
An invalid channel has been
specified.
Specify a valid channel and try to restart
streaming.
Connection to the server terminated.
Check the communication
environment.
Reconnect using a stable communications
environment.
There is a possibility that the movie
was not saved correctly on the
server.
Check whether or not the movie was
saved on the server.
Not enough stream time.
Could not be saved to the server.
Increase the time period for streaming.
Could not verify the certificate.
Continue connection?
Obtain and import a root certificate.
For details about importing a root
certificate, see page 94.
Also, check that the clock setting of the
camcorder is set to the correct date and
time.
Unable to access the media.
The memory card could not be loaded.
The memory card may be damaged.
Could not connect to the server.
Check “DESTINATION SET”.
Check (NETWORK SET) t
[RTMP/RTMPS] t [DESTINATION
SET] settings.
Continued ,
To Next Page
Loading...
Need help?
General
