29
Getting Started
Open the cover, and insert the
memory card with the notched
corner in the direction as illustrated
until it clicks into place.
• If you insert a memory card into the slot in the
wrong direction, the memory card, the memory
card slot, or image data may be damaged.
• Memory card slot A accepts both “Memory
Stick PRO Duo” and SD cards. Memory card
slot B accepts SD cards only.
To eject a memory card
Lightly push the memory card once.
b Notes
• If “The image database file is corrupted. The
media must be restored to use again.” appears,
format the memory card (p. 98).
• When inserting or ejecting a memory card, be
careful of the memory card popping out and
dropping.
Selecting the memory card slot to be
used for recording
Press the SLOT SELECT button to change
which slot is selected for recording. You
can confirm the selected slot on the screen.
b Notes
• You can only select a slot that already has a
memory card inserted.
• When recording to a memory card, you cannot
switch the slot even if you press the SLOT
SELECT button.
z Tips
• When only one slot has a memory card inserted,
the slot that has the memory card is selected
automatically.
• When the memory card becomes full during
recording, the camcorder automatically switches
to the other slot if a memory card is inserted
(relay recording, p. 31).
If a repair memory card prompt screen
appears
There may have been a problem recording
to the memory card during the most-recent
recording. Select [OK] to repair the card to
the extent possible. Select [CANCEL] to
continue without repairing.
b Notes
• Correct repair may not be possible, even when
repair is executed.
• Repair is not supported if an error occurs when
recording in XAVC S format.
Inserting a memory card
Memory card slot A
Note the direction of the notched corner.
Memory card slot B
SLOT SELECT button
To Next Page
Loading...
Need help?
General
