Sony NXCAM HXR-NX80 User Manual

50
Audio setup
You can record sound in stereo using the
camcorder’s internal microphone.
Select [INT MIC] in the [MIC SELECT]
menu.
z Tip
• To reduce wind noise, set [INT MIC WIND] to
[ON].
The jacks, switches and dials shown below
allow you to set the sound that is recorded.
See page 10 for details about connecting a
microphone.
Recording sound from the
internal microphone
Recording sound from an
external audio device
Internal microphone
External audio input jacks
A: INPUT1 jack
B: INPUT2 jack
Audio source switches
D: INPUT1 (LINE/MIC/MIC+48V)
switch
F: INPUT2 (LINE/MIC/MIC+48V)
switch
Audio source level controls
C: ATT (INPUT1) switch
E: ATT (INPUT2) switch
Recording channel switch
H: REC CH SELECT (INPUT1) switch
Audio level controls
I: AUTO/MAN (CH1) switch
J: AUDIO LEVEL (CH1) dial
K: AUTO/MAN (CH2) switch

Sony NXCAM HXR-NX80 Specifications

General

Lens	ZEISS Vario-Sonnar T*
Optical Zoom	12x
ND Filter	Clear, 1/4, 1/16, 1/64
Image Stabilization	Optical SteadyShot with Active Mode
Maximum Resolution	3840 x 2160 (4K)
Microphone	Built-in stereo microphone
Memory Card Slots	Dual SD card slots
Effective Pixels	14.2MP
Digital Zoom	48x
Focal Length	9.3 - 111.6 mm
Aperture	f/2.8 - f/4.5
Minimum Focusing Distance	1 cm (Wide)
Recording Format	XAVC S, AVCHD
Frame Rate	Up to 120fps (HD)
Audio Recording	Linear PCM 2ch, Dolby Digital 2ch
LCD Screen	3.5-inch (1.56 million dots) touchscreen LCD
Viewfinder	0.39-inch type OLED, approx. 2.36 million dots
Battery	NP-FV70A
Dimensions	89.5 x
Connectivity	HDMI, USB, Wi-Fi, NFC