Sony NXCAM HXR-NX80 User Manual

19
Getting Started
Getting Started
Step 1: Checking supplied accessories
Make sure that you have following items
supplied with your camcorder. If, for any
reason, there is something missing, contact
your Sony dealer.
The number in the parentheses indicates the
number of that item supplied.
AC Adaptor (p. 21)
Power cord (mains lead) (p. 21)
RMT-845 Wireless Remote Commander
(p. 16)
A button-type lithium battery is already installed.
Large eyecup (p. 26)
Lens hood (p. 12)
Lens cap (Attached to lens)
Accessory shoe kit (Accessory shoe (1),
Accessory shoe plate (1), screws (4))
(p. 23)
XLR handle unit
USB cable
Rechargeable battery pack (NP-FV70A)
CD-ROM “Manuals for Solid-State Memory
Camcorder”
Operating Guide (2)
Software Downloads
When the unit is used with a PC
connection, download any device drivers,
plug-ins, and application software you
require from the following websites.
You can work with recorded video on a
computer, for example, combining relay-
recorded movies, using the “Catalyst
Browse” application software. For details,
see the supplied brochure.
For details about NLE (Non-Linear
Editing) use, contact the software maker.
Continued ,

Sony NXCAM HXR-NX80 Specifications

General

Lens	ZEISS Vario-Sonnar T*
Optical Zoom	12x
ND Filter	Clear, 1/4, 1/16, 1/64
Image Stabilization	Optical SteadyShot with Active Mode
Maximum Resolution	3840 x 2160 (4K)
Microphone	Built-in stereo microphone
Memory Card Slots	Dual SD card slots
Effective Pixels	14.2MP
Digital Zoom	48x
Focal Length	9.3 - 111.6 mm
Aperture	f/2.8 - f/4.5
Minimum Focusing Distance	1 cm (Wide)
Recording Format	XAVC S, AVCHD
Frame Rate	Up to 120fps (HD)
Audio Recording	Linear PCM 2ch, Dolby Digital 2ch
LCD Screen	3.5-inch (1.56 million dots) touchscreen LCD
Viewfinder	0.39-inch type OLED, approx. 2.36 million dots
Battery	NP-FV70A
Dimensions	89.5 x
Connectivity	HDMI, USB, Wi-Fi, NFC