94
– SLOW & QUICK (S&Q MOTION, SUPER
SLOW MOTION
– NIGHTSHOT
– FOCUS MAGNIFIER
– AUTO MODE SET
– Other network functions
• During Wireless TC LINK execution, [TC
RUN] is set to [FREE RUN]. After the function
is stopped, the setting remains set to [FREE
RUN].
• During Wireless TC LINK execution, [TC
MAKE] is set to [PRESET]. After the function
is stopped, the setting remains set to [PRESET].
z Tips
• You can check the last synchronization time
with the status check function (p. 68).
• If the timecode from a smartphone is changed
during Wireless TC LINK execution, “TC has
been synced.” is displayed.
• After the “TC has been synced.” message
appears, the timecode is adjusted on each
camera.
Importing a root
certificate
A root certificate is required for
USTREAM streaming. The camcorder
contains a built-in root certificate, which
can also be updated. To update the root
certificate, save the certificate on a memory
card and then import the certificate from the
memory card.
1 Write the root certificate to a
memory card.
Write the certificate in PEM format with
a “certification.pem” file name to the
root directory of the memory card.
2 Insert the memory card with the
root certificate into memory card
slot A of the camcorder.
3 Press the MENU button.
4 Select (NETWORK SET) t
[ROOT CERTIFICATE] t [OK].
• The root certificate starts importing.
• The certificate is imported
successfully when “Completed.”
appears. Select to dismiss the
screen.
b Notes
• Do not eject the memory card while a certificate
is being imported.
• Resetting network settings (p. 95) will delete the
root certificate imported from the memory card,
and will initialize the root certificate of the
camcorder.
Note on wireless network function
We assume no responsibility whatsoever
for any damage caused by unauthorized
access to, or unauthorized use of,
Synchronizing the timecode of multiple
cameras using a smartphone (Continued)
To Next Page
Loading...
Need help?
General
