54
b Notes
• When [SCENE SELECTION SET] is set, the
following settings are canceled.
– White balance
–Iris
– Shutter speed
– ISO sensitivity/gain
• When [SCENE SELECTION SET] is set, the
focus area is fixed to [WIDE].
You can shoot bright video, even in low
light conditions, such as outdoor locations
with limited street lighting or dimly lit
indoors, by automatically optimizing the
gain and shutter speed.
b Note
This function is available only when the AUTO/
MANUAL switch is set to AUTO and [AUTO
MODE SET] is set to [AUTO].
1 Set the AUTO/MANUAL switch
AUTO.
2 Press the MENU button.
3 Select (CAMERA SET) t
[LOW LUX] t [ON].
• is displayed.
• To cancel, set [LOW LUX] to [OFF].
You can shoot scenes under very dark
conditions by turning on the infrared light.
The infrared light does not turn on if
[NIGHTSHOT LIGHT] is set to [OFF].
1 Press the MENU button.
2 Select (CAMERA SET) t
[NIGHTSHOT] t [ON].
• is displayed.
• To cancel, set [NIGHTSHOT] to [OFF].
b Notes
• NIGHTSHOT can only be used when the
AUTO/MANUAL switch is set to AUTO.
• NIGHTSHOT uses infrared light. Make sure
that your finger does not cover the NightShot
light when shooting.
• Remove the lens hood.
• Do not use NIGHTSHOT in bright conditions.
Doing so may damage the camcorder.
You can customize the picture quality by
adjusting picture profile items such as
[GAMMA] and [DETAIL]. You can make
adjustments for the time of day, weather
conditions, or just personal preference.
Press the ASSIGN3/PICTURE PROFILE
button to display the picture profile
selection screen.
Select a picture profile number to enable
shooting with the selected picture profile
settings (p. 127).
You can change the settings of the picture
profile.
Picture quality settings for different
recording conditions have been stored in
[PP1] through [PP10] as default settings.
[PP4] is set for the picture profile by
default.
Shooting in dimly lit locations
(LOW LUX)
Shooting in dark conditions
(NIGHTSHOT)
Customizing the picture quality
(Picture Profile)
Useful functions (Continued)
To Next Page
Loading...
Need help?
General
