Sony NXCAM HXR-NX80 User Manual

24
Step 4: Turning on the camcorder and setting
the date and time
Open the LCD screen and turn the
power on.
You can also turn on the power by
extending the viewfinder or by pressing the
1 (On/Standby) button.
When you use your camcorder for the first
time, the [CLOCK SET] screen appears.
To turn off the power
Close the LCD screen.
If the viewfinder is extended, return it to its
original position.
You can also turn off the power by pressing
the 1 (On/Standby) button.
b Notes
• If a warning message is displayed, follow the
instructions.
• When recording movies or when connected to
another device via USB, the camcorder does not
turn off even if the LCD screen is closed and the
viewfinder is returned to its original position.
Set the date and time when you use your
camcorder for the first time.
z Tip
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 161).
To set the date and time again, press the
MENU button, and select (OTHERS)
t [CLOCK SET].
1 Set the area.
2 Set [SUMMERTIME], [Y], [M], [D],
hour, and minute.
Turning on the camcorder Setting the date and time
LCD screen

Sony NXCAM HXR-NX80 Specifications

General

Lens	ZEISS Vario-Sonnar T*
Optical Zoom	12x
ND Filter	Clear, 1/4, 1/16, 1/64
Image Stabilization	Optical SteadyShot with Active Mode
Maximum Resolution	3840 x 2160 (4K)
Microphone	Built-in stereo microphone
Memory Card Slots	Dual SD card slots
Effective Pixels	14.2MP
Digital Zoom	48x
Focal Length	9.3 - 111.6 mm
Aperture	f/2.8 - f/4.5
Minimum Focusing Distance	1 cm (Wide)
Recording Format	XAVC S, AVCHD
Frame Rate	Up to 120fps (HD)
Audio Recording	Linear PCM 2ch, Dolby Digital 2ch
LCD Screen	3.5-inch (1.56 million dots) touchscreen LCD
Viewfinder	0.39-inch type OLED, approx. 2.36 million dots
Battery	NP-FV70A
Dimensions	89.5 x
Connectivity	HDMI, USB, Wi-Fi, NFC