EasyManuals Logo

Sony NXCAM HXR-NX80 User Manual

Sony NXCAM HXR-NX80
171 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
47
Recording
x Setting the A/B value
Select A or B for recording with the
white balance setting stored in memory
A or B.
x To use the PRESET value of white
balance
Select (CAMERA SET) t [WB
PRESET] and select a desired setting.
To save the adjusted white balance
value in memory A or B
1 Set the AUTO/MANUAL switch B to
MANUAL.
2 Press the WHITE BALANCE button
A to highlight the white balance value.
3 Turn the MANUAL dial to select A
( A) or B ( B).
4 Press the MENU button.
5 Select (CAMERA SET) t [WB
SET].
6 Frame a white object such as a piece of
paper that fills the screen under the
same lighting conditions as your
subject.
7 Press the v/V/b/B/SET button.
The adjusted value is stored in A or
B. The stored color temperature
appears for about 3 seconds.
z Tip
If [WB SET] is assigned to an ASSIGN button,
the adjusted value is stored by pressing the
ASSIGN button when the shooting screen is
displayed, instead of performing step 4.
b Note
When a white balance adjustment value has not
been obtained successfully, A or B
starts flashing slowly. Adjust the subject
appropriately and set the shutter speed to auto or
around 1/60 (when [60i] is selected)/1/50 (when
[50i] is selected), then try adjusting the white
balance again.
To restore automatic adjustment
Press the WHITE BALANCE button A.
b Note
When you set the AUTO/MANUAL switch B
to AUTO, iris, ISO sensitivity/gain, shutter
speed, and white balance are adjusted
automatically. You cannot adjust manually.
Setting values
Example of recording
conditions
Outdoor
([OUTDOOR])
When recording a night
scene, neon lighting,
fireworks, etc.
When recording a
sunrise, sunset, etc.
Under daylight
fluorescent lamp
n Indoor
([INDOOR])
Where lighting
conditions change,
such as at a party place,
etc.
Under video light, such
as in a studio, etc.
Under a sodium or
mercury lamp
Color
temperature
setting ([MANU
WB TEMP])
You can set a desired
color temperature
between 2300K and
15000K with
(CAMERA SET) t
[WB TEMP SET]
(default setting is
6500K).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony NXCAM HXR-NX80 and is the answer not in the manual?

Sony NXCAM HXR-NX80 Specifications

General IconGeneral
LensZEISS Vario-Sonnar T*
Optical Zoom12x
ND FilterClear, 1/4, 1/16, 1/64
Image StabilizationOptical SteadyShot with Active Mode
Maximum Resolution3840 x 2160 (4K)
MicrophoneBuilt-in stereo microphone
Memory Card SlotsDual SD card slots
Effective Pixels14.2MP
Digital Zoom48x
Focal Length9.3 - 111.6 mm
Aperturef/2.8 - f/4.5
Minimum Focusing Distance1 cm (Wide)
Recording FormatXAVC S, AVCHD
Frame RateUp to 120fps (HD)
Audio RecordingLinear PCM 2ch, Dolby Digital 2ch
LCD Screen3.5-inch (1.56 million dots) touchscreen LCD
Viewfinder0.39-inch type OLED, approx. 2.36 million dots
BatteryNP-FV70A
Dimensions89.5 x
ConnectivityHDMI, USB, Wi-Fi, NFC

Related product manuals