EasyManua.ls Logo

Sony STR-DA3300ES - Page 114

Sony STR-DA3300ES
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tuning radio stations
1 Press TUNER repeatedly to select the
FM
or
AM
band.
You can also use
INPUT
SELECTOR
on
the receiver.
2 Press TUNING + or TUNING
-.
Press
TUNING
+ to scan from low to high
frequencies, press
TUNING
- to scan from
high to low frequencies.
The
receiver stops
scanning whenever a station is received.
You can also press
TUNING
MODE
on the
receiver to select "AUTO," then turn
TUNING
to select stations.
Selecting a frequency directly
(Direct tuning)
1 After selecting the
FM
or
AM
band,
press D.TUNING.
2 Press the numeric buttons to enter the
frequencies, then press
8)
to enter.
1 Tune in the station that you
want to preset.
For details on the operation, refer to
"Tuning radio stations."
2 Press MEMORY.
"MEMORY"
appears on the display for a
few seconds. Perform steps 3 and4 before
the display changes.
3 Press PRESET + or
PRESET
-
to select a preset number.
30
FM
and 30
AM
preset numbers are
available.
If
"MEMORY"
disappears
before you select the preset number, start
again from step
2.
4 Press ENTER.
The
station is stored as the selected preset
number.
If
"MEMORY"
disappears
114
GB
before you select the preset number, start
again from step 2.
5 Repeat steps 1 to 4 to preset
another station.
Selecting a preset station
1 Press TUNER repeatedly to select the
FM
or
AM
band.
2 Press PRESET+ or PRESET -
repeatedly to select the preset station
you want.
You
can
also press the numeric buttons to
select the preset station you want. Then,
press
ENTER
to
enter
the selection.
You can also press
TUNING
MODE
on
the
receiver repeatedly to select
"PRESET,"
then use
TUNING
to select the preset
stations you want.
For
details
on
XM/SIRIUS
Radio
service,
refer to "Listening to satellite radio" (page 79)
in
"Tuner
Operations."
Checking the Satellite Tuner ID
1 Press SHIFT, then press
XM
to select
"XM RADIO," or press SIRIUS to select
"SIRIUS."
You
can
also use
INPUT
SELECTOR
on
the receiver.
2
PressTUNING+orTUNING-toselect
channelO.
You can also press
TUNING
MODE
on
the
receiver to select "AUTO," then turn
TUNING
to select channel
O.
3 Check the
XM
10
or SIRIUS
10
on
the
display and write it
in
the space
provided here.
XM
10:
_
SIRIUS
10:
_

Table of Contents

Other manuals for Sony STR-DA3300ES

Related product manuals