2 While the
RM
SET
UP
button
is
flashing, press
the
input
button
(including
TV)
for
the
component
you
want
to
control.
For example,
if
you are going to control a
VCR connected to VIDEO 2, press
VIDEO
2.
RM SET UP and the input button light up.
If
you press the button for a component
of
which you cannot program the remote,
such as DMPORT, XM or SIRIUS, etc.,
the RM SET UP button keeps flashing.
3 Press the
numeric
buttons
to
enter the
numeric
code (or one
of
the
codes
if
more than one
code exists)
corresponding
to
the
component
and
the
maker
of
the
component
you
want
to
control.
RM SET UP and the input button light up.
Note
For a
TV
remote code value, only numbers in
the
SOO's
are valid.
Programming
the
remote
You
can customize the remote to match the
components connected to your receiver.
You
can even program the remote to control non-
Sony components and also Sony components
that the remote is normally unable to control.
The procedure below uses as an example a
case in which a VCRmade by a company other
than Sony is connected to the VIDEO 2 IN
jacks on the receiver.
Before you begin, note that:
-
You
cannot change the settings
of
PHONO.
- The remote can control only components
that accept infrared wireless control signals.
Be sure
to
turn
on
the
receiver and
point
the
remote
towards
the
receiver when
performing
the
following
procedure.
1
2
3
4
1 Press AV
1/(0
while
pressing
RM
SET UP.
The RM SET UP button flashes.
Tip
When you press RM SET UP, use a thin wire,
such as a paper clip.
4 Press ENTER.
Once the numeric code has been verified,
the RM SET
UP
button flashes twice and
the remote automatically exits the
programming mode. The input button
also turns off.
To
cancel
programming
Press
RM
SET UP during any step.
The
numeric
codes
corresponding
to
the
component
and the maker
of
the
component
Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year
of
the component, more than
..
c:
tn
;:,
cc
...
~
CD
:D
CD
3
o
(it
continued-----
119
GB