Settings
for
the
video
(Video
settings
menu)
You can use the Video settings menu to
reassign the component video input to another
input and to nameinputs. Select"Video" in the
Settings menu. For details on adjusting the
parameters, see "7: Operating the receiver
using the GUI (Graphical User Interface)"
(page 38).
• Resolution
(Converting video signals)
Lets you convertthe resolution
of
analog video
input signals.
• DIRECT
• AUTO
• 480i/576i
• 480p/576p
• 720p
•
l080i
•
l080p
For details on operating, see
"In
the video
input/output conversion table classified by the
menu settings" (page 34).
Settings
for
HDMI
(HDMI
menu)
You can use the HDMI menu to make the
required settings for components connected to
the
HDMIjack.
Select "HDMI" in the Settings
menu. For details on adjusting the parameters,
see "7: Operating the receiver using the GUI
(Graphical User Interface)" (page 38).
• HDMI Control
Lets you
tum
the components connected to the
HDMI
jack
using an HDMI cable on
or
off.
•
ON
• OFF
Note
When you set "HDMI Control" to "ON," "HDMI
Audio" may be changed automatically.
• HDMI Audio
(Setting HDMI audio input)
Lets you set the HDMI audio signals output
from the playbackcomponentconnectedto the
receiver via an HDMI connection.
•
TV+AMP
The sound is output from
TV's
speaker and
the speakers connected to the receiver.
Notes
• The sound quality
of
the playback component
depends on the
TV's
sound quality, such as the
number
of
channels, and the sampling frequency,
etc. When the TV has stereo speakers, the sound
output from the receiver is also stereo as that
of
the
TV,
even
if
you play multi-channel source.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
"AMP."
• When you select the input that you have assigned
the HDMI input, sound does not output from the
TV.
•
AMP
The HDMI audio signals from the playback
component is only output to speakers
•
continued-----
57
GB
To Next Page
Loading...
