Sony STR-DA3300ES - Watching a DVD;Blu-Ray Disc

6
3
-40.0
VOLUME dB
53
GB
...,..$ .ik.ik-ik.k.!11A":iJ
->lOUO/BO"1>
An example of the display
MULTI CHANNEL DECODING lamp
4 Switch the input of the TV so that an image
of the DVD/Blu-ray Disc
is displayed.
5 Play back the disc.
6 Adjust to a suitable volume.
7 After you have finished watching a DVD/Blu-
ray Disc, eject the disc and turn off the
receiver, the
TV, and the DVD player or Blu-
ray Disc Player.
1 Turn on the TV and DVD player or Blu-ray
Disc Player.
2 Turn on the receiver.
3 Press INPUT SELECTOR on this receiver to
select "DVD/BD."
You can also press DVD/BD on the RM-AALOll remote.
2-
3
6
Watching a DVD/Blu-ray Disc
. Q*
You can select the sound field to
suit the movie or the music. Refer
to page 62 for details.
Recommended sound fields:
Movie: Cinema Studio
EX
Live image: Live Concert
Sport: Sports
.Q*
Select the sound format of the
disc to be played,
if necessary.
(I)
Check the following if you cannot
listen to the multi-channel sound.
• Be sure the sound source
corresponds to the multi-
channel format (the MULTI
CHANNEL DECODING lamp
on the front panel lights up
during playback).
• Be sure this receiver is
connected to the DVD player,
Blu-ray Disc Player via a digital
connection.
• Be sure the digital audio output
of the DVD player, Blu-ray Disc
Player is set up properly.
(I)
• Refer to the operating
instructions supplied with the
TV and DVD player, Blu-ray
Disc Player.