Sony STR-DA3300ES - Using the Surround Back Decoding Mode

continued-----
Using the surround back
decoding mode
By decoding the surround back signal
recorded
in Dolby Digital Surround EX, DTS-
ES Matrix, DTS-ES Discrete 6.1, etc., formal.
you can enjoy the surround sound intended by
the filmmakers.
-tt--2-5
1 Make sure that the AMP button
is lit.
If it is not lit, or "GUI MODE" is not
displayed
in the display window of the
receiver, follow the steps
in "7: Operating
the receiver using the
GUI (Graphical
User Interface)" (page 38).
2 Press .,+ repeatedly to select
"Settings," then press
8) or •.
The Settings menu list appears on the TV
screen.
3 Press .,+ repeatedly to select
"Surround," then press
8) or •.
4 Press .,+ repeatedly to select
"S8 Dec Mode," then press 8).
5 Press .,+ repeatedly to select
the surround back decoding
mode, then press
8).
Tip
You can selecl the surround back decoding mode
using
"SB Decoding" on the Surround settings
menu.
Using the surround back
decoding mode (SB Decoding)
By decoding the surround back signal
recorded
in Dolby Digital Surround EX, DTS-
ES Matrix, DTS-ES Discrete 6.1. etc
.. format,
you can enjoy the surround sound intended by
the filmmakers.
• S8 Decoding
(Surround back decoding)
• AUTO
When the input stream contains the
6.1
channel decode tlag
a
), the appropriate
decoding
is performed on the surround back
signal.
..
m
2.
~.
::J
lC
C/)
l:
...
a
l:
::J
a.
C/)
o
l:
::J
a.
65
GB