lIetlillg
SlalleR
Description
and
location
of
parts
To
remove the cover
~~===:::s=----
Press PUSH.
When you remove the cover, keep it out
of
reach from children.
Status of the POWER button
Off
The receiver
is
turned off (initial
setting).
Press POWER to turn the receiver on.
You
cannot turn the receiver on using
the remote.
On/Standby
Press 1/(9 on the remote to turn the
receiver on or set it to the standby mode.
When you press POWER on the
receiver, the receiver will be turned off.
To Next Page
Loading...
