•
Make
sure the
center/surround
speaker
(s)
is (are) set to
either
"SMALL"
or
"LARGE"
(page
68).
There
is
no sound from the surround
back speakers.
•
Some
discs have
no
Dolby
Digital
Surround
EX
flag even
though
the
packages
have
Dolby
Digital
Surround
EX
logos. In this case, select
"ON"
in
the
"SB
Dec
Mode"
(page
65).
There is no sound from the sub woofer.
•
Check
that the
sub
woofer
is
connected
correctly
and
securely.
•
Make
sure
you
have
turned
on
your
speaker.
•
When
all speakers are set to
"LARGE"
and
"Neo:6
Cinema,"
or
"Neo:6
Music"
is
selected. there is no
sound
from
the
sub
woofer.
The surround effect cannot be
obtained.
•
Make
sure the
sound
field function is
on
(press
MOVIE
or
MUSIC).
•
Sound
fields
do
not
function for signals
with a
sampling
frequency
of
more
than
48
kHz.
Dolby Digital or DTS multi-channel
sound is not reproduced.
•
Check
that the
DVD,
etc.
you
are playing
is
recorded
in
Dolby
Digital
or
DTS
format.
•
When
connecting
the
DVD
player, etc., to
the digital input
jacks
of
this receiver,
rnake sure the setting for the digital
audio
output
of
the
connected
component
is
available.
Recording cannot be carried out.
•
Check
that the
components
are
connected
correctly
(page
21
).
•
Select
the
source
component
using
INPUT
SELECTOR
(page
50).
132
GB
The MULTI CHANNEL DECODING lamp
does not light up
in
blue.
•
Check
that
the
playback
component
is
connected
on
a digital
jack
and
the
input
is
selected
properly
on
this receiver.
•
Check
whether
the
input
source
of
the
software
being
played
back
corresponds
to
the
multi-channel
format.
•
Check
whether
the
setup
on
the
playback
component
is set to
multi-channel
sound.
•
Check
to
make
sure the
selected
audio
(digital) input
jack
is
not
assigned
to
other
inputs in
"Input
Assign"
in the
Input
menu
(page
94).
There is no sound from the component
connected to the DIGITAL MEDIA PORT
adapter.
•
Adjust
the
volume
of
this receiver.
•
The
DIGITAL
MEDIA
PORT
adapter
and/or
component
is
not
connected
correctly.
Turn
off
the receiver,
then
reconnect
the
DIGITAL
MEDIA
PORT
adapter
and/or
component.
•
Check
the
DIGITAL
MEDIA
PORT
adapter
and/or
component
device to
make
sure it
supports
this receiver.
Video
There is no picture or
an
unclear
picture appears on the TV screen or
monitor.
•
Select
the
appropriate
input
on
the receiver
(page
50).
•
Set
your
TV
to the
appropriate
input
mode.
•
Move
your
TV
away
from
the
audio
components.
•
Assign
the
component
video
input
correctly.
•
The
input
signal
should
be
same
as
input
when
you are up-converting an
input
signal
with
this receiver
(page
32).
The image of the COMPONENT VIDEO
OUT is corrupted.
• Video input signals
other
than
480p
component
are
not
received
when
signals
To Next Page
Loading...
