Using
the
HDMI
CONTROL
function
for
'BRAVIA'
Theatre
Sync
'BRAVIA' Theatre Sync only supports a Sony
BRAVIA which offers the 'BRAVIA' Theatre
Sync function.
By connecting Sony components that are
compatible with the HDMI CONTROL
function with a HDMI cable (not supplied),
operation is simplified as below:
• One-Touch Play: When you play back a
component such as a DVD/Blu-ray Disc
Player, the receiver and the TV are turned on
automatically and switch to the appropriate
HDMI input.
• System Audio Control: While watching
TV,
you can select to output the sound from the
TV speaker or the speakers connected to the
receiver.
• System Power Off: When you turn off the
TV,
the receiver and connected components
are also turned off simultaneously.
HDMI CONTROL
is
a mutual control
function standard used by HDMI CEC
(Consumer Electronics Control) for HDMI
(High-Definition Multimedia Interface).
The HDMI CONTROL function
does not work
in
the following
cases:
• When you connect the receiver to a
component which is not correspond with
Sony's HDMI CONTROL function.
• When you connect the receiver and
components using other than HDMI
connection.
We recommend that you connect the receiver
to products featuring 'BRAVIA' Theatre
Sync.
2
GB
'BRAVIA' and
BRAVIA
are trademarks
of
Sony Corporation.
Note
Depending on the connected component, the HDMI
CONTROL function may not work. See the
operating instructions
of
the component.
To Next Page
Loading...
