Notes
• Before connecting cords, make sure to disconnect
the AC
power
cord (mains lead).
•
Connect
image display
components
such as a
TV
monitor
or
a projector to the
MONITOR
VIDEO
OUT
jack
on the receiver. You may not be able to
record, even
if
you connect recording components.
• Turn on the receiver when the video and audio
of
a
playback
component
are being output to a
TV
via
the receiver.
If
the
power
supply
of
the receiver is
not turned on, neither video nor audio is
transmitted.
• Depending on the status
of
the connection
between
the
TV
and the antenna (aerial), the
image
on the
TV
screen may be distorted. In this case, place the
antenna (aerial) farther away from the receiver.
Tips
•
The
receiver has a video conversion function.
For
details, see
"Notes
on converting video signals"
(page 33).
•
The
sound
of
the
TV
is output from the speakers
connected to the receiver
if
you
connect
the sound
output
jack
of
the
TV
and the
TV
IN
jacks
of
the
receiver. In this configuration, set the sound output
jack
of
the
TV
to
"Fixed"
if
it can
be
switched
between either
"Fixed"
or
"Variable."
•
The
screen saver is activated when the
GUI
menu
is displayed on the
TV
screen and there has been
no
operation attempted for
15
minutes.
20
GB
To Next Page
Loading...
