Notes
• This function does not work in the following cases.
- The multi-channel input
is
selected.
- Input signals
of
which the sampling frequency is
more than 48 kHz are being received.
- The multi-channel Linear PCM signals are
received via an HDMI IN jack.
•
If
you set up the sound field during DTS 96/24
signal reception, the signal will be played back
only at 48 kHz.
• Neural-THX is activated as a
PCM
signal
of
which
the sampling frequency is less than 48kHz, a 2
channel analog signal or Linear PCM signals. The
Neural-THX processing will be turned off
automatically when another type
of
signal is input.
The beginning
of
the sound may be dropped out
when the SURROUND processing is turned on/off.
Tips
• We usually recommend
"A.ED.
Auto", however
sometimes it may be better to use SB Decoding to
match the input stream to the mode you prefer.
• You can identify the encoding format
of
DVD
software, etc., by looking at the logo on the
package.
• Dolby Pro Logic IIx decoding is effective, when a
multi-channel signal is input.
At this time, the setup
of
"SB Decoding" and "SB
Dec Mode" in the Surround settings menu becomes
invalid. When you select decoding modes other
than Dolby Pro Logic IIx, multi-channel sound
(being encoded) is output.
If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no L.F.E. signal, which is a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for "Neo:6 Cinema" or "Neo:6
Music" when all speakers are setto "LARGE."
In order to take full advantage
of
the Dolby
Digital bass redirection circuitry, we
recommend setting the sub woofer's cut off
frequency as high as possible.
61
GB
•
m
::::J
o·
~.
::::J
CQ
en
c:
"'"
"'"
o
c:
::::J
Co
en
o
c:
::::J
Co
To Next Page
Loading...
