92 (GB) Adjustments
Fine Adjustment for Each Input Signal
Adjustments
Fine registration adjustment
1 Press the PATTERN key to display the CROSS HAIR pattern.
2 If necessary, fine adjust the registration.
For details, see “Adjusting the Registration” on pages 66 (GB) to 88 (GB).
3 When you connect two or more RGB input sources, fine adjust the
registration for each input signal.
4 Press the MEMORY key and release it to save the adjustment data.
SIZE adjustment
Adjust the picture size if it does not fit the screen.
1 Press the RGB SIZE key.
2 Adjust the picture size with the arrow keys.
V : The vertical size is expanded.
v :The vertical size is reduced.
b :The horizontal size is expanded.
B :The horizontal size is reduced.
3 Press the MEMORY key to save the adjustment data.
SHIFT adjustment
If the picture needs to be shifted to fit the screen, adjust the RGB SHIFT.
1 Press the RGB SHIFT key.
2 Select the adjustable range of the vertical shift (V SHIFT) with the
POSITION +/– keys.
WIDE: Normally, set to this position.
NARROW: Set to this position to make the adjustable range in the
vertical direction narrow.
Picture
Screen
RGB SIZE ADJ
Hc: 80
Hf: 80
Vc: 80
Vf: 80
ADJ:
To Next Page
Loading...
